hexahedrel mesher terminated abnormally錯誤報告
模型所述是一個雙反射面天線，主板上面我放置了八個饋源，目的是想通過這個陣列饋源的相位改變控制天線的掃描，用時域求解器仿真all ports，網格自適應加密或者手動局部加密都會出現這個錯誤，實在不知道為什么，請大家看看 謝謝了。
器件太大，網格太多，空白空間占用了很多網格資源。
嘗試用subgridding，給出警告信息：
Shape "component1:solid2" was internally patched to maintain watertightness
按照幫助文件的說法：
Shape "xxx" was internally patched to maintain watertightness.
It might happen that the surface of a solid body is not completely closed. This might be caused by a CAD model imported from a different vendor.
During the process of matrix generation the surface of the respective solid body is repaired automatically in order to run the hexahedral based solver correctly. The repaired part of the shape is shown in the mesh view of the project. The original CAD model remains unchanged.
錯誤報告的貼圖呢
能說下你機器的配置嗎
好像不報錯。
！不報錯？我自己電腦仿了4次，改了四次都是一個錯誤。貼圖我沒留 但是錯誤這句話我記著了。
可能你時間還沒到 得仿一陣子才會報。
一億網格啊，要仿好久啊。。。
其他不說了 機器內存32G
一個端口 我上次仿了20個小時
