關于 微帶線鐵氧體移相器的問題
我正在學習移相器設計，現在看了一篇關于移相器的文章，有幾個地方不知道怎么表述。請大家幫忙解決一下 謝謝
1.It is also shown that after calibrating measured values to account for the ratio between the
applied external Ampere/turn values to the internally applied -field value used in the high-frequency structure simulator (HFSS), good agreement may be seen between the simulation and
experimental results.
2 All the microstrip lines are designed to be 50 . Tapered transitions are used to connect the three microstrip lines to the feed network structure as shown in Fig. 1(a).
3 A milling process was used to fabricate the vertical (90°) side walls where a photo-laminate etch process was used to fabricate the feed networks.
這是在ieee上面下載的文章 ，我最近正在翻譯這篇文章，很多的地方不明白，感興趣的朋友可以一起看看 ，大家討論討論
東西很不錯 有時間好好研究研究
一起學習下，郵件：cd0054115@126.com
不錯我想做這方面的工作我想用耦合微帶線來做
有時間可以交流交流哈QQ：285432879
共同學習 727493096@qq.com
