HFSS仿真一個喇叭天線的時候遇到的。
Horn (D:/Data/HFSS/)
HFSSDesign1 (DrivenModal)
[info] Adaptive solution setup, process hf3d: '1' conductors touch lumped port 'P1', typically a lumped port contains 2 conductors. Please verify conducting boundaries and objects are correctly assigned and touch the port. If a Radiation boundary touches the port and it is desired for use during the port solution, select 'Use Radiation Boundary on Ports' under the Advanced tab in the Solution Setup. (8:30:15 下午 十一月 18, 2011)
[info] Adaptive solution setup, process hf3d: '1' conductors touch lumped port 'P1', typically a lumped port contains 2 conductors. Please verify conducting boundaries and objects are correctly assigned and touch the port. If a Radiation boundary touches the port and it is desired for use during the port solution, select 'Use Radiation Boundary on Ports' under the Advanced tab in the Solution Setup. (8:31:50 下午 十一月 18, 2011)
同軸線耦合到矩形波導中，用的是Drivenmodel模式，Lump port端口饋電。。但是提示有這個問題。不是到底什么意思i？
同問。。有沒有大神來解答一下啊
這么多年了，還是沒人解答啊。。我自己都學會啦。。
也遇到這問題啦，求LZ解答一下吧
樓主怎么解決的，我也遇到同樣的問題
這么久了，我給忘記了。。真不知道當初是如何遇到這個問題的了。。
