微波EDA (www.tanchuguo.com) 網友回復：

• 網友回復

  頂樓主，我也一直想問是什么意思……

• 網友回復

  問題解決了
  Rounding the Edge of Objects (Fillet Command)
  To round the edge of an object:
  
  1. Select the edge you want to change.
  
  This highlights the edge and enables the Fillet command.
  
  Click 3D Model>Fillet or click the fillet icon .
  
  The Fillet Properties dialog is displayed.
  
  2. Enter a value for the Fillet Radius in the text field and select units from the drop down menu. The default is millimeters.
  
  3. Enter a value for the setback distance.
  
  The setback distance controls the shape of the vertex. It is the distance of the cross curve from the vertex at the end of the edge. If it is less than the fillet radius it has no effect. You will get an error if it is greater then the length of the edge.
  
  4. Click OK to apply the change to the edge.
  
  The dialog closes and the object is rounded by the radius value relative to the edge you selected.
  而cloneto 是當進行其他命令時自動加進去的，比如在進行substrate操作時選中了 Clone tool objects before subtract 復選框時，被減去的物體仍在在在中視圖中，而在MODEL TREE 下會有一條命令那就是cloneto啊
  
  

• 網友回復

  這個是60G的吧，帶寬不太清楚                       。

申明：網友回復良莠不齊，僅供參考。如需專業解答，推薦學習李明洋老師的HFSS培訓視頻，或咨詢本站專家。