微波EDA (www.tanchuguo.com) 網友回復：

• 網友回復

  我單位的機子都裝不上，不知道怎么回事，也許和破解有關系吧，要不就是機子的問題，不支持

• 網友回復

  我用beta好像問題好大阿,可能是破解問題吧,也有可能是beta本身的錯誤吧

• 網友回復

  是啊，但我同事的老機子是裝上的拉，可能是我機子的問題吧

• 網友回復

  都出11了，我10還剛用上呢，不過10比9的確有所改進，不知道11改進了什么

• 網友回復

  Version 11.0 Major Enhancements
  
  ===============================
  
  Solving:
  
  - Higher-order basis functions incorporated for improved accuracy and solution efficiency
  
  - Improved port-solver to handle lower frequencies, and decrease noise floor
  
  - Analytic ports for rectangular, circular, and coaxial port geometries to improve modal
  
    consistency and port accuracy
  
  - Iterative solver option reduces RAM requirements for large solutions and makes use of
  
    multiple processors to handle more than one excitation
  
  
  
  
  
  Meshing:
  
  - Higher-quality tetrahedra with lower aspect-ratio to promote faster convergence
  
  
  
  
  
  Floquet Ports:
  
  - Produce higher accuracy at large scan angles
  
  - Provide additional information that is particularly useful for periodic structures, such
  
    as phased-array antennas and frequency-selective surfaces: separation of fields into
  
    modes, phase information available for each mode
  
  
  
  
  
  Screening Impedance Boundary:
  
  - Available to replace geometrically complex periodic screens or grids
  
  - Isotropic or anisotropic impedance can be specified directly or through a link to another
  
    unit-cell design
  
    
  
  Incident Fields:
  
  - Total-field formulation now uses E- and H-field information from the incident wave
  
  - Incident field from small current loop is now available
  
  
  
  
  
  Design Link:
  
  - SIWave-HFSS and HFSS-HFSS links based on E- and H-fields
  
  - Additional option to update source field pattern at each adaptive pass
  
  
  
  
  
  Distributed Solve Option:
  
  - Automatic distribution of individual discrete and interpolating sweep frequencies to different
  
    nodes
  
  - Distributed solve available for all Optimetrics' setups, including Optimization, Sensitivity,
  
    and Statistical Analysis
  
  
  
  
  
  Optimetrics:
  
  - Addition of Genetic Algorithm
  
  - Latin Hypercube Sampling now included in statistical analysis setup
  
  
  
  
  
  Desktop:
  
  - Toolbar customization
  
  
  
  
  
  Modeler:
  
  - Upgrade to ACIS R16 SP6
  
  - Auto-assignment of terminals at port setup eliminates need for terminal lines
  
  - New commands: Region, Thicken Sheet, Sweep Face Along Normal
  
  - Enhanced manual-healing GUI and more advanced auto-healing procedure during geometry import
  
  - CATIA v4 and v5 geometry import now available
  
  - GDSII export now available
  
  
  
  
  
  Post-Processing:
  
  - Fully scriptable new report editor and 2D plot GUI
  
  - Copy and paste of data from one report to another
  
  - Generation of report templates
  
  - Ranged functions to extract calculations such as maximum, minimum and average from a plot
  
    or dataset
  
  - Mesh statistics available in the solution data panel
  
  - Antenna parameters: front-to-back ratio as part of antenna parameters; 3-dB beamwidth and
  
    sidelobe levels included as part of the ranged functions

• 網友回復

  另外有一點，我想說的是：
  不要動不動就把問題規到Crack上。其實，要校驗Crack是否有問題，很簡單，真正又有多少人做過？
  現在的軟件、資料都來得太容易，人們很容易浮躁，我們需要做的是Design，而不是拿個軟件隨便跑跑。要用好這些軟件，首先得有基本功。

• 網友回復

  大家要把HFSS-VCRedist-vcredist_x86.exe先運行一下，這樣才能裝的上
  還有就是無論路徑還是文件名還有里面的名稱也不要出現中文，
  我的機器裝上就挺好用的，我同事他們就有的用不起來

• 網友回復

  1.我昨天裝了一下,當時我的也報錯了,發現是FLEXID裝不上,后來發現是和我的殺毒軟件有沖突,關閉殺毒軟件后(當然你首先要確定你的HFSS內不含毒,用殺毒軟件掃一下)重裝了一遍后通過。
  2.然后，把HFSSFIX.COM拷貝到你的---：“某盤：\Ansoft\HFSS10” 文件下下，雙擊‘HFSSFIX.COM”。
  3.把license.lic拷貝到你的---：“某盤：\Ansoft\admin”文件夾下即可！

• 網友回復

  網上公認v11的破解有問題,我現在用的時候發現計算結果有,但是在結果處理的時候老提示無結果,暈,頭大,算得快是很快.

• 網友回復

  我用HFss11 beta 好像還好嗎。只是有些小問題。

• 網友回復

  我今天剛裝上,感覺不錯
  就是暗裝之前先運行一下HFSS>>VCRedist-vcredist_x86.exe后再安裝就 沒問題了
  不然就會報錯,說什么應用程序出錯
  

• 網友回復

  我用9和10都不停的報錯說硬盤空間不夠
  自從用了v11，跑麻麻順，從來不錯

• 網友回復

  11占的內存和硬盤空間都小了...
  速度有些提高..

申明：網友回復良莠不齊，僅供參考。如需專業解答，推薦學習李明洋老師的HFSS培訓視頻，或咨詢本站專家。